$229.00 Original price was: $229.00.$199.00Current price is: $199.00.
Out of stock
Fine-selected IN/OUT with high audio quality, All within the compact body.
Perfect for RCA Line input and output as well as mic/guitar direct input. The US-1×2 is a 2-in/2-out audio interface with the most compact body among US series.
Features:
Vocal / Wind Instrument Recording with outstanding audio performance
The recording environment with low noise and great audio performance is an relevant factor for vocal and wind instrument recordings. The US-1×2 interfaces feature Ultra-HDDA microphone pre-amplifier with the EIN measurement of -127dBu. It is an ideal tool for recording your vocals and wind instruments with condenser microphones. Despite the lack of knowledge on recording equipment, its user-friendly design enables you to be able to use the unit on your recording right away.
Electric Guitar Recording in DAW through Hi-Z Direct Input
The US-1×2 interfaces also support direct inputs with high impedance for electric guitars and basses. By Directly connecting your guitar, you can sound like a actual guitar amp with your DAW plug-in effects. Before cranking effects to your guitar recorded track, the quality of tone is the key. The US-1×2 interfaces ensure clarity to your track. In addition, external effector pedals or any amp simulator can be used through direct input as well
A Great Music Composition Tool for Vocalist
As the US-1×2 is equipped with both condenser microphone input and a 1/4″ line input, you can easily record from an acoustic guitar while singing using the line input. The US-1×2 allows you to record ideas for songs right away. When recording with the iPad DAW app, you can connect the unit to iPad device via Lightning connector and the camera adapter to enjoy the music creation
Small Mixing & Mastering Environment on Your Desktop
The quality of D/A conversion is important in the mixing and mastering stage after recording. Not only the mic input but also the audio circuit with high audio performance allows you to record clear sounds. Separate volume controls for the headphone and line output are available, so you can easily adjust volume on your headphone(s) and monitor speakers separately.
Audio Playback and Archieve
The back of the device also contains an input signal level compatible RCA pin jack stereo input connector. This makes it possible to connect the US-1×2 to audio devices such as CD player, cassette player, turntables and other audio equipment. Convert your analog audio files to digital with high audio quality. In addition, exceptional DAC circuit is designed for music production which enables music playback with high audio resolution.
Sampling frequency | 44.1k/48k/88.2k/96k Hz |
Quantization bit rate | 16/24bit |
Analog audio inputs | |
MIC IN (IN 1) | |
Connector | XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED |
Input impedance | 2.4k ohms |
Nominal input level | |
GAIN:MAX | -65dBu (0.0004Vrms) |
GAIN:MIN | -8dBu (0.3090Vrms) |
Maximum input level | +8dBu (1.9467Vrms) |
Gain | 57dB |
LINE/INST IN (IN 2) | |
LINE IN | |
Connector | 6.3mm(1/4″) TRS-jack(T:HOT, R:COLD, S:GND), BALANCED * When set to “LINE” at LINE/INST switch |
Input impedance | 10k ohms |
Nominal input level | |
GAIN:MAX | -41dBu(0.0069Vrms) |
GAIN:MIN | +4dBu(1.228Vrms) |
Maximum input level | +20dBu(7.75Vrms) |
Gain | 57dB |
INST IN | |
Connector | 6.3mm(1/4″) TS-jack(T:HOT, S:GND), UNBALANCED * When set to “INST” at LINE/INST switch |
Input impedance | 1M ohms |
Nominal input level | |
GAIN:MAX | -58dBV(0.0013Vrms) |
GAIN:MIN | -13dBV(0.2239Vrms) |
Maximum input level | +3dBV(1.1425Vrms) |
Gain | 57dB |
LINE L/R IN | |
Connector | RCA pin-jack, UNBALANCED |
Input impedance | 10k ohms |
Maximum input level | +6dBV(1.9953Vrms) |
Analog audio outputs | |
LINE OUT | |
Connector | RCA pin-jack, UNBALANCED |
Output impedance | 100 ohms |
Maximum output level | +6dBV (1.995Vrms) |
PHONES | |
Connector | 6.3mm(1/4″) stereo phone jack |
Maximum output level | 18mW+18mW or more (THD+N 0.1% or less, 32ohms loaded) |
Control IN / OUT | |
USB | |
Connector | USB B type 4-pin |
Format | USB2.0 HIGH SPEED |
DC IN 5V | |
Connector | USB Micro B type |
Power | |
When connected PC | USB bus powered |
When connected iOS | AC Adapter (TASCAM PS-P520, sold separately) |
Power consumption | 2.5W |
Dimensions | 146(W) × 55(H) × 120(D)mm |
Weight | 623g |
Operating temperature | 5 to 35˚C |
Accessories | USB cable (1.5m), Installation manual, User’s manual, warranty card |
Frequency response | |
IN 1/IN 2 to LINE OUT L-R | |
44.1k/48k Hz | 20Hz to 20kHz, +0dB/-0.5dB(JEITA) |
88.2k/96k Hz | 20Hz to 40kHz, +0dB/-1.0dB(JEITA) |
PHONES | |
44.1k/48k Hz | 20Hz to 20kHz, +0dB/-1.0dB(JEITA) |
88.2k/96k Hz | 20Hz to 40kHz, +0dB/-3.0dB(JEITA) |
THD | 0.006% or less |
S/N ratio | 100dB or more |
Crosstalk | 95dB or more |
EIN | -127dBu or less |
Windows | |
Compatible computers | Windows-compatible computer with a USB 2.0 port |
CPU type/speed | Dual core/2GHz or more(x86) |
Memory | 2GB or more |
DRIVER | ASIO2.0, WDM |
Mac | |
Compatible computers | Mac with a USB 2.0 port |
CPU type/speed | Dual core/2GHz or more(x86) |
Memory | 2GB or more |
DRIVER | Core Audio |
iOS | |
DRIVER | Core Audio for iPhone |
Weight | 1.00 kg |
---|---|
Dimensions | 1460.00 × 1200.00 × 550.00 mm |
Brand | Tascam |
Unit 6 / 25 Stratton Street, Newstead, QLD, 4006
Unit 2 / 3 United Road, Ashmore, QLD, 4214