Sennheiser Wireless EW100 Headset Kit with Rode HS2PL Headset

HS2PL Specs

• Acoustic Principle
  Permanently Polarised Condenser
• Active Electronics
  JFET impedance converter
• Address Type
  Omni
• Frequency Range
  60Hz – 18kHz
• Output Impedance
  3000Ω
• Maximum SPL
  122dBSPL
• Maximum Output Level
  189.0mV (@ 1kHz, 1% THD into 1KΩ load)
• Sensitivity
  -47.2dB re 1 Volt/Pascal (4.70mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Equivalent Noise Level
  (A-weighted) 36dBA
• Weight
  20g
• Dimensions
  50mmH x 124mmW x 205mmD

SK 100 G4

• Dimensions

  Approx. 82 x 64 x 24 mm

• Compander

  Sennheiser HDX

• THD, total harmonic distortion

  ≤ 0.9 %

• Weight

  (incl. batteries) approx. 160 g

• Signal-to-noise ratio

  ≥ 110 dBA

• RF output power

  Max. 30 mW

• Switching bandwidth

  up to 42 MHz

• Peak deviation

  ±48 kHz

• Nominal deviation

  ±24 kHz

• Operating time

  Typically 8 h

• Modulation

  Wideband FM

• Power supply

  2 AA batteries, 1.5 V or BA 2015 accupack

• Current consumption

  at nominal voltage: typ. 180 mA

  with transmitter switched off: ≤ 25 µA

• Input impedance

  40 kΩ, unbalanced / 1 MΩ

• Max. Input voltage

  3 Veff

• Powering

  3 V battery / 2.4 V rechargeable battery

• Transmission frequency

  Max. 1680 transmitting frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels

• AF frequency response

  Mic: 80 – 18,000, Hz Line: 25 – 18,000 Hz

• Temperature Range

  -10 °C to +55 °C

• Frequency stability

  ≤ ±15 ppm

EM 100 G4

• Frequency range

  A1: 470 – 516 MHz

• Dimensions

  Approx. 190 x 212 x 43 mm

• Compander

  Sennheiser HDX

• THD, total harmonic distortion

  ≤ 0.9 %

• Weight

  Approx. 980 g

• Audio output

  6.3 mm jack socket (unbalanced): +12 dBu

  XLR socket (balanced): +18 dBu

• Signal-to-noise ratio

  ≥ 110 dBA

• Switching bandwidth

  up to 42 MHz

• Peak deviation

  ±48 kHz

• Nominal deviation

  ±24 kHz

• Modulation

  Wideband FM

• Power supply

  12 V DC

• Antenna connector

  2 BNC sockets

• Current consumption

  300 mA

• Adjacent channel rejection

  Typically ≥ 65 dB

• Intermodulation attenuation

  Typically ≥ 65 dB

• Receiving frequency

  Max. 1680 receiving frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 12 factory-preset channels, no intermodulation 1 frequency bank with up to 12 programmable channels

• RF sensitivity

  < 2.5 μV for 52 dBA eff S/N

• Squelch

  low: 5 dBµV middle: 15 dBµV high: 25 dBμV

• Equalizer

  Preset 1: Flat

  Preset 2: Low Cut (-3 dB at 180 Hz)

  Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz)

  Preset 4: High Boost (+6 dB at 10 kHz)

• Temperature Range

  -10 °C to +55 °C

• Receiver Principle

  True diversity

• Blocking

  ≥ 70 dB